5,867 found, showing page 32 of 147
$12.99
1/4x100' BLANK TUBING
Blank drip tubing. Ideal for use with spot watering emitters or can be used to run water to emitter tubing.
View Details
$5.49
3/4FHTX3/4MPT CONNECTOR
Non-swivel fitting ideal for connecting one garden hose to another garden hose. Brass construction.
View Details
$12.19
4LB VEGETABLE FERTILIZER
4LB VEGETABLE FERTILIZER
View Details
$16.79
*RINGER HOG*****
Nickel-plated and made of cast malleable iron. Available with or without spring.
View Details
$12.49
14'x14' BIRD NETTING 3/4mesh
Multi-purpose netting ideal for protecting fruit, berries, grapes, and trees from birds and other garden pests. Safe and humane way to protect gardens. Features ultra violet inhibitors for long life. Strong and durable. Made of 3/4 inch polypropylene mesh. Environmentally friendly, uses recycled materials.
View Details
$11.49
70" TENSION BAR
Tension bar for chain link fence. Galvanized. 7-gauge.
View Details
$29.99
1-5/8"x8' LINE POST
Galvanized line post compatible with galvanized fencing framework for chain link fence. Galvanized steel with zinc coating.
View Details
$32.99
2-3/8"X8' TERMINAL POST
Corner post for chain link fence. 18-gauge. Compatible with galvanized fencing framework for chain link fence. 2-3/8-inch.
View Details
$229.99
*6'x50' CHAIN LINK 11.5GA*******
Chain link fencing fabric. Galvanized before weaving for maximum rust resistance. 2-3/8-inch mesh.
View Details
$8.49
1.5 CUFT ORGANIC COMPOST
1.5 CUFT ORGANIC COMPOST
View Details
$59.99
4'X4' RUSTIC GARDEN BED
4'X4' RUSTIC GARDEN BED
View Details
$33.99
BLADE REPL*****
Blade set for a 38" MTD deck. Contains two 19-9/32" MTD rider blades O.E. model No. 742-0473A. OEM parts. Packaged 2 blades per box.
View Details
$26.99
2M 1" PLASTIC CAP NAIL (6LB)
Already assembled with a ring shank nail. Round plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, and more.
View Details
$33.49
BLADE REPL
2 blade set fits MTD 42" deep decks, 1990-1996 2-in-1 bagging and side discharge. 13/32" round center hole. Blade dimensions: 3" W. x .147" thick x 21-13/64" L.
View Details
$2.69
2PK PLASTIC END CAP
For use with any standard male hose end (5/8 In.). Durable construction. 2 caps per package. Not for hot water use.
View Details
$24.99
LANCE AND VARIABLE NOZZ
LANCE AND VARIABLE NOZZ
View Details
$7.99
6" WHITE PLANT BRACKET
Durable hanging plant bracket. Ideal for hanging plants, bird feeders, wind chimes, and more. Hardware included for easy installation. Can be used indoors or outdoors.
View Details
$249.99
17" STRAIGHT SHAFT GAS TRIMMER
29 cc, 4-cycle engine with standard choke and SpringAssist starting system with JumpStart capability. 17 In. cutting width with Click N Trim bump head that uses 0.095 In. line. Straight shaft with a multi-position adjustable handle that reduces vibration and operator fatigue. Accepts Trimmer Plus attachments. JumpStart capable. Refer to Model No. 49U2341K953 (SKU 705820) for replacement trimmer cartridge. 2 year limited warranty.
View Details
$7.99
TIE WIRE GA16 BLACK 3.5LB
Secures rebar to rod chairs, rebar chairs, and other intersecting pieces of rebar. General construction use. Black. 16 gauge. 3.5 lb.
View Details
$12.99
BLADE EDGER*********************
MTD/Yard Man edger blade, 9" x 2-1/2" with a 5/8" center hole, OEM model No. 781-0080. OEM parts. Packaged 1 per box.
View Details
$8.99
8-10 PLASTC ANCHOR W/SCR
Recommended for light-duty static applications where holding power is not critical. For use in concrete, block, brick, and wallboard. Screws included.
View Details
$23.49
64" BLACK SHEPHERD HOOK
Single rod hanger installs in ground easily by using the H-hook on the bottom of the rod. Constructed of 1/2 In. wrought iron rod. For use in hanging flower baskets, bird feeders, bug lights, and various hanging yard art. Designed for 12 In. basket, 12 Lb. weight capacity.
View Details
$29.99
26" MATTOCK TILLER
This versatile tool plants, tills, and also is ideal for ground preparation and cultivating. Ductile iron head with a -2-1/4" wide mattock blade and 3 sturdy 5" tines. Head weight 2 lb. 26" straight American hickory handle that is flame treated and covered with a clear lacquer.
View Details
$64.99
1/16-3/16 SWAGE TOOL 18"
Hand swage/cutter. For service center fabricating or customer rental. Completely portable. Hardened jaws securely swage loops up to 2 ton capacity. Special instructions and sash number system assure reliable results. Swages sizes 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16" cable/sleeves. Packaged.
View Details
SCREW 8x3 FINE DW 2M
Bugle head fine thread. For attaching gypsum board to 20 to 25-gauge steel studs. No. 2. Reduced Phillips recess.
View Details
SCREW 8x2-1/2 FINE DW 2.5Mbox
Bugle head fine thread. For attaching gypsum board to 20 to 25-gauge steel studs. No. 2. Reduced Phillips recess.
View Details
$54.99
*SCREW 6x2 FINE DW 3.5Mbox
Bugle head fine thread. For attaching gypsum board to 20 to 25-gauge steel studs. No. 2. Reduced Phillips recess.
View Details
$26.99
20LB 16-16-16 FOOD FERTILIZER
16-16-16 formulation. A concentrated, fast-acting combination of ingredients that can be used for lawns, flowers, vegetables, and shrubs. Traditional multi-purpose fertilizer used by farmers. Ideal for use a planting time and each month throughout the growing season. Covers up to 4000 square feet.
View Details
5M 1-5/8 FINE DW SCREW
Bugle head fine thread. For attaching gypsum board to 20 to 25-gauge steel studs. No. 2. Reduced Phillips recess.
View Details
8M 1-1/4" FINE DW SCREW
Bugle head fine thread. For attaching gypsum board to 20 to 25-gauge steel studs. No. 2. Reduced Phillips recess.
View Details
$46.99
WHEEL 8x400
Arnold 2-ply, ribbed pneumatic tire has a welded hub construction. Grease reservoir fittings assure lubrication. 5/8 In. ball bearing with 6 In. hub length. Tubeless.
View Details
$33.99
*REP. DECK BELT 42"
Kevlar deck belt for MTD 42" deep deck rider, O.E. model No. 754-0371A. OEM parts. Packaged 1 per sleeve.
View Details
10-24X2-1/2 MACH SCREW
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
View Details
$229.99
*CONC ROUNDUP 2.5GAL 41%
Broad spectrum, non-selective, systemic grass and weed killer. Translocates through the plant to kill roots and brush. Biodegradable and rain fast, will not wash or leach to affect nearby vegetation, and may be used over root zones of desirable plants. 41\% concentrated formulation which is ideal for a small landscaper. Can be used for lawn renovation, along fences, paths, driveways, and on hard to kill brush and weeds. Active ingredient: Glyphosate. 2-1/2 gallon jug.
View Details
1/4-20X1/2 RD MACH SCREW
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
View Details
$144.99
290-590GPH POND PUMP
PondMaster Eco pond pump designed specifically for small to medium size ponds and statuary. Features a 15 Ft. power cord with grounded plug, screened intake, and energy efficient magnetic drive. Variable flow control and includes all fittings. 2-year limited warranty. 115V/60Hz. Discharge: 1/2 In. and 3/4 In. threaded barbed fittings.
View Details
*1/4-20x3/4 SCREW,MA RH
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
View Details
